View the collection.

Application

Wall, Wet & Level Interior Floor*, Floor, Shower Floor*, Countertop, Shower Floor**, and Pool Linings***

Application Notes:
Suitable for exterior applications (provided it is noted as suitable in the applications chart above) in freezing and non-freezing climates, when proper installation methods are followed.

*Matte finish only.
** 2 x 2 mosaic tile only.
*** Mosaic tile only.

Grout Joint Recommendation
Floor: 1/8″ (3/16″ when multiple sizes are installed in a modular pattern, and/or when installing tile with a length 15″ or greater in a staggered brick-joint pattern; overlap should not exceed 33%.)
Mosaic: 1/8″

Durability

Floor Surface Wear Resistance
1 Residential Bathrooms 3 All Residential / Light Commercial*
2 All Residential Areas 4 All Residential / Commercial**

• Satin and Polished finish.
  ** Matte finish.

Notes

Since there are variations in all fired ceramic and natural products, tile and trim supplied for your particular installation may not match samples. Final confirmation should be made from actual tiles and trim prior to installation. Manufactured in accordance with ANSI A137.1
standards.
Not for use on ramps. Water, oil, grease, improper drainage and certain footwear can create slippery conditions. Floor applications expected to be exposed to these conditions require extra caution in product selection.
For additional information refer to “Factors to Consider” at: daltile.com/Factors.
Random visuals enhance the natural beauty of this product. To achieve optimal results, all tile should be selected from multiple cartons and shading and graphic arrangement planned prior to installation.
Special consideration needs to be given when installing tiles greater than 15 inches. Please refer to daltile.com/LargeTiles for more information.
Manufacturer Advisory: All tile is measured by the DCOF AcuTest™ method. Tiles with DCOF values <0.42 are not recommended for use in areas with wet or slippery conditions. For more information, see ANSI standard A137.1 section 6.2.2.1.10, available at www.tileusa.com.
Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the surface. Use of a latex modified thin-set is recommended for installation.

Special Features

Large Format

Made in the USA

Mosaic / Deco

Post-Consumer

Pre-Consumer

Reveal Imaging

TruEdge

ZeroTox