Rekindle 12″ x 24″ Matte

Colorbody Porcelain

Description

Envision (by sq. ft.) Step into rustic comfort with Rekindle™, a concrete look inspired by the restoring effects of a peaceful lifestyle. Large formats available in five earthy tones allow for a smooth, neutral look in large spaces. Add shape and dimension with coordinating 2 x 6 herringbone or canvas dot mosaic, each available in all five colors. Rekindle™ features both StepWise™ and Microban® technology, which makes this a perfect choice for outdoor living spaces and offers a lifetime of built in antimicrobial product protection that does not wash off or wear away. Pool coping and stairs available.

Colors

Thickness

5/16″

Size

11-5/8″ x 23-3/8″
(29.56 cm x 59.44 cm)

Finish

Matte

Shape

Rectangle

Shade Variation

View the collection.

Application

USAGE TYPES:	Target DCOF Wet	Suitable
Dry & Level – Interior Floor	N/A	✓
Wet & Level – Interior Floor	≥ 0.42	✓
Shower Floors (Residential or Light Commercial)	≥ 0.42	✓*
Exterior Floor Applications (including patios, pool decking & other wet areas with minimal footwear)	≥ 0.60	✓**
Ramps & Inclines	≥ 0.65
Walls/Backsplashes	N/A	✓
Countertops	N/A	✓
Pool Linings	N/A	✓*

A DCOF value of ≥0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-A326.3. For more information about DCOF and the DCOF AcuTest™, visit daltile.com/DCOF.
APPLICATION NOTES:
Suitable for exterior applications (provided it is noted as suitable in the applications chart above) in freezing and non-freezing climates, when proper installation methods
are followed.

*Mosaic tile only.
** 12 x 24 and Mosaic tile only

Grout Joint Recommendation

Floor: 1/8″ (3/16″ when multiple sizes are installed in a modular pattern, and/or when installing tile with a length 15″ or greater in a staggered brick-joint pattern; overlap should not exceed 33%.)

Mosaic: 1/8″

Testing

Breaking Strength C648	Chemical Resistance C650	Water Absorption C373	Scratch Hardness MOHS	Shade Variation Rating
275 lbs	Resistant	< 0.5%	8.0	V3

Durability

Floor Surface Wear Resistance
1 Residential Bathrooms 3 All Residential / Light Commercial
2 All Residential Areas 4 All Residential / Commercial

Notes

Since there are variations in all fired ceramic and natural products, tile and trim supplied for your particular installation may not match samples. Final confirmation should be made from actual tiles and trim prior to installation. Manufactured in accordance with ANSI A137.1 standards.
Not for use on ramps. Water, oil, grease, improper drainage and certain footwear can create slippery conditions. Floor applications expected to be exposed to these conditions require extra caution in product selection.
For additional information refer to “Factors to Consider” at: daltile.com/Factors.
To achieve optimal results, all tile should be selected from multiple cartons and shading and graphic arrangement planned prior to installation.
Special consideration needs to be given when installing tiles greater than 15 inches. Please refer to daltile.com/LargeTiles for more information.
Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the surface. Use of a latex modified thin-set is recommended for installation.