Slimlite Alloy Effects 39″ x 59″ Satin

Colorbody Porcelain

Description

Artisan (by sq. ft.) THIN PANELS WITH ENDLESS OPTIONS SlimLite™ Panels are designed for conventional wall tile installation or can be placed over existing wall tile to save you time and money without sacrificing style. Available in large sizes up to 39 x 118 for a seamless and durable wall design. A BUREAU OF OPTIONS Available in large sizes up to 39 x 118. Offered in 4 collections: Alloy Effects, Coastline, Terra, and Classic. NATURAL DESIGN Can be installed over existing tile. Made of 100% natural products.

Colors

Thickness

3.5 mm

Size

39.37″ x 59.05″ Panel
(100.00 cm x 150.00 cm
Panel)

Finish

Satin

Shape

Rectangle

View the collection.

Application

USAGE TYPES:	Target DCOF Wet	Suitable
Dry & Level – Interior Floor	N/A
Wet & Level – Interior Floor	≥ 0.42
Shower Floors (Residential or Light Commercial)	≥ 0.42
Exterior Floor Applications (including patios, pool decking & other wet areas with minimal footwear)	≥ 0.42 (Mosaic) ≥ 0.60 (Floor)
Ramps & Inclines	≥ 0.65
Walls/Backsplashes	N/A	✓
Countertops	N/A
Pool Linings	N/A

Grout Joint Recommendation: Interior: 1/16″ Exterior: 3/8″
A DCOF value of ≥0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-A326.3. APPLICATION NOTES: Floor tile suitable for exterior applications (provided it is noted as suitable in the applications chart above) in freezing and non-freezing climates, when proper installation methods are followed. Wall and mosaic tile suitable for exterior applications (provided it is noted as suitable in the applications chart above) in non-freezing climates, when proper installation methods are followed.

Testing

Breaking Strength C648	Chemical Resistance C650	Water Absorption C373	Scratch Hardness MOHS	Modulus of Rupture C1505	Dry Bond Strength C1505	Wet Bond Strength C1505	Shade Variation Rating
85 lbs	Resistant	< 0.5%	7.0	6,000 ps	150 psi	100 psi	Low (V1) – Classic Medium (V2) – Coastline & Terra High (V3) – Alloy Effects

Back-Layer Saturation C373	Stain Resistance C1378	Crazing Resistance C424	Thermal Shock C484	Thermal Expansion 10-6 / °C-1 C372	Resistance to Freeze/Thaw Cycling C1026	Abrasion Resistance C243
< 0.5%	Resistant	Pass	Pass	average value 4,12	Resistant	N/A

Notes

Since there are variations in all fired ceramic and natural products, tile and trim supplied for your particular installation may not match samples. Final confirmation should be made from actual tiles and trim prior to installation. Manufactured in accordance with ANSI A137.1 standards.
Not for use on ramps. Water, oil, grease, improper drainage and certain footwear can create slippery conditions. Floor applications expected to be exposed to these conditions require extra caution in product selection. Random visuals enhance the natural beauty of this product. To achieve optimal results, all tile should be selected from multiple cartons and shading and graphic arrangement planned prior to installation.
Special consideration needs to be given when installing tiles greater than 15 inches.
Manufacturer Advisory: All tile is measured by the DCOF AcuTest™ method.
Tiles with DCOF values <0.42 are not recommended for use in areas with wet or slippery conditions. For more information, see ANSI standard A137.1 section 6.2.2.1.10, available at www.tileusa.com.
Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the surface. Use of a latex modified thin-set is recommended for installation.

All products within the SlimLite Porcelain Panels series are available via special order only, with a lead time of 10-12 weeks.

Special Features

Large Format

TruEdge

ZeroTox