Render Metals 3″ x 18″ Pleated Satin
Metal
Description
Elegance (by sq. ft.) ENERGIZE ANY INTERIOR Create a unique appeal with the handcrafted strength and sophistication of Render Metals™. The invigorating look of traditional metal can now be an essential element in even the most moisture-prone interior wall spaces. From hospitality to high-end residences, four striking patterns and four metallic shades make every project look custom. AN ELEMENT OF ELEGANCE The invigorating look of traditional metal can now energize moisture-prone interior wall spaces such as bathrooms and showers. Achieve a high-end look that is also low maintenance. MORE WAYS TO WOW Offered in an on trend longer size for maximum design impact. Available in four striking patterns with four metallic shades to complement both rustic and modern designs.
Thickness
5/16″
Size
3″ x 18″
(7.62 cm x 45.77 cm)
Finish
Satin
Shape
Rectangle
Shade Variation
V2
View the collection.
Application
| USAGE TYPES: | Target DCOF Wet | Suitable |
| Dry & Level – Interior Floor | N/A | ✓* |
| Wet & Level – Interior Floor | ≥ 0.42 | |
| Shower Floors (Residential or Light Commercial) | ≥ 0.42 | |
| Exterior Floor Applications (including patios, pool decking & other wet areas with minimal footwear) | ≥ 0.42 (Mosaic) ≥ 0.60 (Floor) | |
| Ramps & Inclines | ≥ 0.65 | |
| Walls/Backsplashes | N/A | ✓** |
| Countertops | N/A | |
| Pool Linings | N/A |
| Grout Joint Recommendation: 1/8″ (When rectangular size is installed in a staggered brick-joint pattern; overlap should not exceed 33%.) | ||
| A DCOF value of ≥0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-A326.3. APPLICATION NOTES: For interior use only. * Paned and Oblique not suitable for this application. ** Product can be installed in wet areas such as backsplashes, bathroom walls and shower enclosures, but is not recommended in areas with swimming pools or hot tubs as pool chemicals may harm protective coating. |
Notes
Render Metals™ is a cast metal collection and is permanently protected by Q-Seal™: Stain and scratch resistant, antimicrobial.
Due to the handcrafted nature of Render Metals, variations in structure can be expected and are intended to enhance the visual interest of this artisan product. Special care should be used in installation; see installation instructions for details.
Since there are variations in all fired ceramic and natural products, tile and trim supplied for your particular installation may not match samples. Final confirmation should be made from actual tiles and trim prior to installation. Manufactured in accordance with ANSI A137.1 standards.
Not for use on ramps. Water, oil, grease, improper drainage and certain footwear can create slippery conditions. Floor applications expected to be exposed to these conditions require extra caution in product selection.
Manufacturer Advisory: All tile is measured by the DCOF AcuTest™ method. Tiles with DCOF values <0.42 are not recommended for use in areas with wet or slippery conditions. For more information, see ANSI standard A137.1 section 6.2.2.1.10, available at www.tileusa.com.
Special Features
Made in the USA
ZeroTox
