Plinto In 4.2” x 21.3”
White Body Ceramic
Description
Artisan (by sq. ft.) ”Plinto” is a distinctive piece that transforms your spaces with its unique and elegant design. Its profile features an intricate play of reliefs that adds a special dimension to any environment. This collection is characterized by its shapes that protrude and recede, generating a visual effect that captures light and shadow in a sophisticated manner, perfectly adapting to a wide range of decorative styles. Perfect for those seeking a detail that elevates the appearance of their spaces
Colors
Thickness
10mm
Size (in.)
4.2” x 21.3”
Finish
Matte, Gloss
Shape
Rectangle
Additional Images
View the collection.
Usage
Testing
| Features | Specification |
|---|---|
| Dimensional Features | 106,5 mm +/- 0,75 mm x 538,5 mm +/- 2mm x 10 mm +/- 0,5mm 106,5 mm +/- 0,75 mm x 538,5 mm +/- 2mm x 10 mm +/- 0,5mm 106,5 mm +/- 0,75 mm x 538,5 mm +/- 2mm x 12,5 mm +/- 0,5mm |
| Modulus of rupture and breaking strength | Thickness ≥ 7,5 mm mínimo 12 N/mm2 Thickness < 7,5 mm mínimo 15 N/mm2 |
| Chemical Resistance | GHA |
| Tone Variation | V1 |
| Crazing Resistance | Pass |
| Household products resistance | GA |
| Stain Resistance | >3 |
| Water Absorption | >10% |
Packing
| Specification | Value |
|---|---|
| Pieces Per Box | 10 |
| Lb/Box | 19,25 lb |
| Square Feet Per Box | 6,23 sq ft |
| Boxes/Pallet | 91 |
| Sq ft/Pallet | 567,140 sq ft |
WAREHOUSING
In order to guarantee the characteristics of the finish the product must be kept in its original packaging until the time of fixing. If the product is likely to be stored for a long period of time it should be suitably covered.
TILE FIXING
To ensure the products adhere correctly to the surface, it is essential to use specific adhesive and grouting material. This must also be suitable for the environment they will have to withstand. Fitting with traditional mortars does not ensure good adhesion.
Due to the nature of the material there may be dimensional variations between pieces. Therefore , all types of joints must be planned and carried out correctly: structural, perimeter, expansion and installation joints. Fitting tiles without joints is not advisable from any technical point of view as this may lead to various problems.
MAINTENANCE AND CLEANING
Once the materials have been fitted, it is advisable to remove any remaining adhesive and grouting material by using a commercial descaling product designed especially, diluted with water . The descaling product must not remain in contact with the surface to be cleaned for more than 5 minutes.
As a general guideline, powder detergents should not be used, not wire wool or abrasive materials. Generally a sponge will be sufficient with warm water and liquid neutral soap. Then rinse with plenty of clean water.
