Metallica Brushed Stainless Steel 1″ Hexagon

Metal

Description

Serenity (by sheet) Polish up your space with the gleam of Brushed Stainless or Oxidized Copper metallic tile colors. Metallica™ lets you enjoy a decorative accent that gets attention. Elevate your accent wall or backsplash with one of several unique mosaics, from penny rounds to hexagons, or keep it simple with classic 4 x 4 squares. UNIQUE YET SUBTLE Real metal-faced accent in unique mosaics or 4 x 4 squares. Matte finish in Brushed Stainless or Oxidized Copper for distinctive walls and backsplashes. RESIDENTIAL OR COMMERCIAL STYLE Excellent selection for cutting-edge commercial designs with an overlay of sophistication. Easy to clean and polish for that brand-new shine in a modern kitchen or bathroom. 12″ Jolly trim available in both colors.

Colors

SKU: INSDAMAMETALBSS1HX Brushed Stainless Steel

Thickness

3/8″

Mosaic Size

1-13/16″ x 1-13/16″
(3.00 cm x 3.00 cm)

Finish

Satin

Mosaic Shape

1″ Hexagon

Shade Variation

View the collection.

Usage

Walls, Backsplashes

USAGE TYPES:	Target DCOF Wet	Suitable
Dry & Level – Interior Floor	N/A
Wet & Level – Interior Floor	≥ 0.42
Shower Floors (Residential or Light Commercial)	≥ 0.42
Exterior Floor Applications (including patios, pool decking & other wet areas with minimal footwear)	≥ 0.60
Ramps & Inclines	≥ 0.65
Walls/Backsplashes	N/A	✓
Countertops	N/A
Pool Linings	No

A DCOF value of ≥0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-A326.3. For more information about DCOF and the DCOF AcuTest™, visit daltile.com/DCOF.
APPLICATION NOTES:
Suitable for exterior applications (provided it is noted as suitable in the applications chart above) in non-freezing climates, when proper installation methods are followed.

Grout Joint Recommendation: 1/8″

Notes

Tiles can be cleaned using warm water and a cloth. To prevent spots dry with a cloth. Wipe in the direction of the polish lines. For deeper cleaning, a mild detergent or glass cleaner can be used. Do not use abrasive cleaners or abrasive sponges. Metallica can be cut using a standard wet-saw. Tiles should be cut with the metal side up. They cannot be cut with tile cutters that are made to score and break the tiles. Once the tile is cut, the marble bisque is going to be visible from the side. Unsanded grout is recommended to avoid scratches. Since there are variations in all natural products, tile and trim supplied for your particular installation may not match these samples. Final color selection should be made from actual tiles and trim and not from tile samples or color reproductions. For additional information, refer to “Factors to Consider” at http://daltile.com/factors-to-consider.cfm.

Special Features

Mosaic / Deco

ZeroTox