Rekindle 24″ x 24″ Paver

Colorbody Porcelain

Description

Infinity (by sq. ft.) Step into rustic comfort with Rekindle™, a concrete look inspired by the restoring effects of a peaceful lifestyle. Large formats available in five earthy tones allow for a smooth, neutral look in large spaces. Add shape and dimension with coordinating 2 x 6 herringbone or canvas dot mosaic, each available in all five colors. Rekindle™ features both StepWise™ and Microban® technology, which makes this a perfect choice for outdoor living spaces and offers a lifetime of built in antimicrobial product protection that does not wash off or wear away. Pool coping and stairs available.

Colors

Thickness

13/16″
(2cm)

Size

23-3/8″ x 23-3/8″
(59.44 cm x 59.44 cm)

Finish

Textured

Shape

Square

Shade Variation

View the collection.

Application

USAGE TYPES:	Target DCOF Wet	Suitable
Dry & Level – Interior Floor	N/A	✓
Wet & Level – Interior Floor	≥ 0.42	✓
Shower Floors (Residential or Light Commercial)	≥ 0.42	✓
Exterior Floor Applications (including patios, pool decking & other wet areas with minimal footwear)	≥ 0.60	✓
Ramps & Inclines	≥ 0.65
Walls/Backsplashes	N/A	✓
Countertops	N/A	✓
Pool Linings	N/A

A DCOF value of ≥0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-A326.3. For more information about DCOF and the DCOF AcuTest™, visit daltile.com/DCOF.
APPLICATION NOTES:
Suitable for exterior applications (provided it is noted as suitable in the applications chart above) in freezing and non-freezing climates, when proper installation methods are followed.

Installation

Dry Laying on Grass: The gaps between the slabs should be chosen depending on the overall desired aesthetic.
Dry Laying on Gravel: Gaps of at least 3/16″ (5 mm) should be left between slabs, using spacers to set the correct width. Joint may be left empty or filled with fine sand, polymeric sand specifically formulated for porcelain tile or small, clean aggregate, depending on the joint width and desired aesthetic.
Dry Laying on Sand: The gaps between the slabs should be chosen depending on the overall desired aesthetic.
Laying on Screed with Adhesive: Slabs must be laid with open joints of variable width of no less than 3/16″ (5 mm).
Raised Pavings: Pedestal contains correct tile spacers for application.

Testing

Breaking Strength C648	Chemical Resistance C650	Water Absorption C373	Scratch Hardness MOHS	Shade Variation Rating
1000 lbs	Resistant	< 0.5%	8.0	V3

Notes

Since there are variations in all fired ceramic and natural products, tile and trim supplied for your particular installation may not match samples. Final confirmation should be made from actual tiles and trim prior to installation. Manufactured in accordance with ANSI A137.1 standards.
Not for use on ramps. Water, oil, grease, improper drainage and certain footwear can create slippery conditions. Floor applications expected to be exposed to these conditions require extra caution in product selection.
For additional information refer to “Factors to Consider” at: daltile.com/Factors.
To achieve optimal results, all tile should be selected from multiple cartons and shading and graphic arrangement planned prior to installation.
Special consideration needs to be given when installing tiles greater than 15 inches. Please refer to daltile.com/LargeTiles for more information.
Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the surface. Use of a latex modified thin-set is recommended for installation.