Sovran 24″ x 48″ Satin

Colorbody Porcelain

Description

Infinity (by sq. ft.) Sovran epitomizes luxury and durability, marrying the opulence of natural marble with the practicality of ColorBody™ porcelain. Each tile boasts a timeless elegance reminiscent of classic white and black marble, adorned with intricate veining that varies from piece to piece. Reinvent your space with Sovran’s distinguished presence, featuring eight bold art deco-inspired patterns that add a touch of grandeur to any setting. The expansive 24 x 48 size with rectified edges create seamless installations – designed with the discerning connoisseur in mind.

Colors

Thickness

5/16″

Size

23-7/16″ x 47-1/16″
(59.60 cm x 119.42 cm)

Finish

Satin

Shape

Rectangle

Application

USAGE TYPES:	Target DCOF Wet	Suitable
Dry & Level – Interior Floor	N/A	✓
Wet & Level – Interior Floor	≥ 0.42	✓
Shower Floors – Standard Center Drain	≥ 0.42
Shower Floors – Linear Drain	≥ 0.60
Exterior Floor Applications (including patios, pool decking & other wet areas with minimal footwear)	≥ 0.60 (Floor)
Ramps & Inclines	≥ 0.65
Walls/Backsplashes	N/A	✓
Countertops	N/A	✓
Pool Linings	N/A

Grout Joint Recommendation: 3/8″ (Overlap should not exceed 33% when installing tile with a length 15″ or greater in a staggered brick-joint pattern.)
A DCOF value of ≥0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-A326.3. APPLICATION NOTES: Suitable for exterior applications (provided it is noted as suitable in the applications chart above) in freezing and non-freezing climates, when proper installation methods are followed.

Testing

Breaking Strength C648	Chemical Resistance C650	Water Absorption C373	Scratch Hardness MOHS	Shade Variation Rating
275 lbs	Resistant	<0.5%	5.0	V3

Durability

Floor Surface Wear Resistance
1 Residential Bathrooms 3 All Residential / Light Commercial
2 All Residential Areas 4 All Residential / Commercial

Notes

Since there are variations in all fired ceramic and natural products, tile and trim supplied for your particular installation may not match samples. Final confirmation should be made from actual tiles and trim prior to installation. Manufactured in accordance with ANSI A137.1 standards.
Water, oil, grease, improper drainage and certain footwear can create slippery conditions. Floor applications expected to be exposed to these conditions require extra caution in product selection.

To achieve optimal results, all tile should be selected from multiple cartons and shading and graphic arrangement planned prior to installation. Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the surface. Use of a latex modified thin-set is recommended for installation.

Special Features

Large Format

Pre-Consumer

Reveal Imaging

TruEdge

ZeroTox