View the collection.

Size Availability

	Nominal Size	PC/Carton	Sq.Ft./Carton
	11.80″ x 11.80″	11	10.65
	11.33” x 11.75”	11	10.42
	11.25” x 11.25″	11	9.67
	10.00” x 10.00”	18	12.50
	13.25” x 14.25”	10	13.11
	12.00″ x 12.00″	11	11.00
	11.63“ x 12.13”	11	10.76

Tech Info

Special Considerations for Zellige Tile:
– Variation in caliber, flatness, straightness, texture, design and shade are present and inherent to the manufacture process of real zellige products.
– Chips, pinholes and other imperfections are common in zellige tiles and are not defective. Material with these characteristics are not subject for exchange or return.
– It is highly recommended to mix pieces from multiple cartons prior to installation in order to achieve a natural shade variation throughout the installation.
– Zellige tiles look beautiful installed with or without grout, and with a variety of grout joint thicknesses. When installing in a wet area, grouting and sealing will be necessary.
– Industry standard recommends overage by 15% in order to account for shortage due to tile cuts, breakage and future repairs.

View the collection.

Application

	Target Dcof Wet	Suitable
Dry & Level – Interior Floor	N/A
Wet & Level – Interior Floor	≥0.42
Shower Floors (Residential or Light Commercial)	≥0.42
Exterior Floor Applications (including pool decking & other wet areas with minimal footwear)	≥0.60
Ramps & Inclines	≥0.65
Walls/Backsplashes	N/A
Countertops	N/A
Pool Linings	N/A
Grout Joint Recommendation: 3/16″

●  Manufacturer Advisory: All tile is measured by the DCOF AcuTestTM method. Tiles with DCOF values less than 0.42 are not recommended for use in areas with wet or slippery conditions. For more information, see ANSI standard A137.1 section 6.2.2.1.10, available at www.tileusa.com.

Durability Chart

Special Features

ZeroTox

Pre-Consumer

Mosaic / Deco

Encaustic

Reveal Imaging

View the collection.

Application

Countertop, Floor, Wall, and Shower Floor

Notes

Since there are variations in all fired ceramic and natural products, tile and trim supplied for your particular installation may not match samples. Final confirmation should be made from actual tiles and trim prior to installation. Manufactured in accordance with ANSI A137.1 standards. Not for use on ramps. Water, oil, grease, improper drainage and certain footwear can create slippery conditions. Floor applications expected to be exposed to these conditions require extra caution in product selection. Random visuals enhance the natural beauty of this product. To achieve optimal results, all tile should be selected from multiple cartons and shading and graphic arrangement planned prior to installation. Special consideration needs to be given when installing tiles greater than 15 inches. Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the surface. Use of a latex modified thin-set is recommended for installation.

Special Features

Large Format

Mosaic / Deco

View the collection.

Application

Floor, Wall, and Shower Floor

Notes

Natural stone products inherently lack uniformity and are subject to variation in aesthetics (color, shade, finish, etc.) and performance (hardness, strength, slip resistance, etc.). Natural stone products do not meet minimum coefficient of friction thresholds recommended by safety standard setting organizations. No warranties, expressed or implied, relative to merchantability or fitness for a particular purpose are made regarding the natural stone products distributed. Check local building codes prior to specification or installation to verify that product technical characteristics comply with required parameters. The existence and dimensions of a bevel may vary from lot to lot. Be sure to request a sample of the specific lot you are planning to order if the bevel is an important feature of your job.

Special Features

Mosaic / Deco

Large Format

View the collection.

Application

	Target Dcof Wet	Suitable
Dry & Level – Interior Floor	N/A
Wet & Level – Interior Floor	≥0.42
Shower Floors – (Residential or Light Commercial)	≥0.42	*
Exterior Floor Applications (including pool decking & other wet areas with minimal footwear)	≥0.60
Ramps & Inclines	≥0.65
Walls/Backsplashes	N/A
Countertops	N/A
Pool Linings	N/A	**
Grout Joint Recommendation 1/8″
●  A DCOF value of greater than or equal to 0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-A326.3. APPLICATION NOTES: Suitable for exterior applications (provided it is noted as suitable in the applications chart above) in freezing and non-freezing climates, when proper installation methods are followed. *Mini Hexagon and Leaf mosaics only. ** Chevron and Diamond mosaics only

Durability

Floor Surface Wear Resistance
1 Residential Bathrooms 3 All Residential / Light Commercial*
2 All Residential Areas 4 All Residential / Commercial

*Mini Hexagon and Leaf mosaics only

Notes

Since there are variations in all glass products, tile and trim supplied for your particular installation may not match samples. Final confirmation should be made from actual tiles and trim prior to installation. ANSI A137.2 Standards.

Special Features

Mosaic / Deco

ZeroTox

Pre-Consumer

Reveal Imaging

View the collection.