Calema Oval 2” x 6.3”
White Body Ceramic
Description
Artisan (by sq. ft.) In Portuguese, “Calema” refers to a strong sea swell characteristic of the western coast of Africa. It specifically describes waves that form far from the shore and crash noisily upon reaching the beach. This phenomenon is common in countries like São Tomé, Príncipe, and Angola. Its inspiration lies in the stillness and subtle texture of sand, evoking a landscape where the earth seems to pause in perfect balance, as if every corner reflects the tranquility of an earthy surface after a gentle motion, leaving a feeling of connection with the deepest and most organic aspects of nature. Rounded Edge Trim 1,1×16 cm / 0.43”x6.3″ available.
Colors
Thickness
8mm
Size (in.)
2” x 6.3”(2.05” x 6.3”)
Finish
Gloss (White Matte)
Shape
Oval
Additional Images
View the collection.
Usage
Indoor, Wall, Showers & Steams
Testing
| Features | Specification |
|---|---|
| Dimensional Features | 52 mm +/- 0,75 mm x 160 mm +/- 0,8 mm x 8 mm +/- 0,5 mm |
| Modulus of rupture and breaking strength | Thickness ≥ 7,5 mm mínimo 12 N/mm2 Thickness < 7,5 mm mínimo 15 N/mm2 |
| Chemical Resistance | GHA |
| Tone Variation | V4 |
| Crazing Resistance | Pass |
| Household products resistance | GA |
| Stain Resistance | >5 |
| Water Absorption | >10% |
Packing
| Specification | Value |
|---|---|
| Pieces Per Box | 85 |
| Lb/Box | 21,87 lb |
| Square Feet Per Box | 7,610 sq ft |
| Boxes/Pallet | 100 |
| Sq ft/Pallet | 761,008 sq ft |
WAREHOUSING
In order to guarantee the characteristics of the finish the product must be kept in its original packaging until the time of fixing. If the product is likely to be stored for a long period of time it should be suitably covered.
TILE FIXING
To ensure the products adhere correctly to the surface, it is essential to use specific adhesive and grouting material. This must also be suitable for the environment they will have to withstand. Fitting with traditional mortars does not ensure good adhesion.
Due to the nature of the material there may be dimensional variations between pieces. Therefore , all types of joints must be planned and carried out correctly: structural, perimeter, expansion and installation joints. Fitting tiles without joints is not advisable from any technical point of view as this may lead to various problems.
MAINTENANCE AND CLEANING
Once the materials have been fitted, it is advisable to remove any remaining adhesive and grouting material by using a commercial descaling product designed especially, diluted with water . The descaling product must not remain in contact with the surface to be cleaned for more than 5 minutes.
As a general guideline, powder detergents should not be used, not wire wool or abrasive materials. Generally a sponge will be sufficient with warm water and liquid neutral soap. Then rinse with plenty of clean water.
