Mistral 1.5″ x 12.2″
Porcelain Body
Description
Prestige (by sq. ft.) The “Mistral” collection evokes a serene coastal atmosphere, with subtle, sophisticated shades that inspire calm and reflection. Its hues mirror natural transitions, blending light and elements to create balanced, harmonious spaces. Each piece carries a sense of serenity, wind, and horizon, connecting subtly with nature.
Colors
Thickness
8.5mm
Size (in.)
1.5″ x 12.2″
Finish
Gloss
Shape
Rectangle
Additional Images
View the collection.
Usage
Indoor Wall, Outdoor Wall, Showers & Steams, Pools
Testing
| Features | Specification |
|---|---|
| Dimensional Features | 37 mm +/- 0,5 mm x 310 mm +/- 1,8 mm x 8,5 mm +/- 0,5 mm |
| Modulus of rupture and breaking strength | Minimum 35 N/mm2 < Individual Minimum 32 N/mm2 |
| Chemical Resistance | GHA |
| Tone Variation | V4 |
| Crazing Resistance | Pass |
| Household products resistance | GA |
| Stain Resistance | >3 |
| Frost resistance | Pass |
| Abrasive Resistance | PEI 4: White PEI 3: Lavender, Khaki, Opal Blue, Aquamarine & Bone PEI 2: Forest & Indigo |
| Water Absorption | ≤ 0,5% |
Packing
| Specification | Value |
|---|---|
| Pieces Per Box | 40 |
| Lb/Box | 19,53 lb |
| Square Feet Per Box | 4,941 sq ft |
| Boxes/Pallet | 96 |
| Sq ft/Pallet | 474,301 sq ft |
WAREHOUSING
In order to guarantee the characteristics of the finish the product must be kept in its original packaging until the time of fixing. If the product is likely to be stored for a long period of time it should be suitably covered.
TILE FIXING
To ensure the products adhere correctly to the surface, it is essential to use specific adhesive and grouting material. This must also be suitable for the environment they will have to withstand. Fitting with traditional mortars does not ensure good adhesion.
Due to the nature of the material there may be dimensional variations between pieces. Therefore , all types of joints must be planned and carried out correctly: structural, perimeter, expansion and installation joints. Fitting tiles without joints is not advisable from any technical point of view as this may lead to various problems.
MAINTENANCE AND CLEANING
Once the materials have been fitted, it is advisable to remove any remaining adhesive and grouting material by using a commercial descaling product designed especially, diluted with water . The descaling product must not remain in contact with the surface to be cleaned for more than 5 minutes.
As a general guideline, powder detergents should not be used, not wire wool or abrasive materials. Generally a sponge will be sufficient with warm water and liquid neutral soap. Then rinse with plenty of clean water.
