Osaka Bars 5″ x 10″
White Body Ceramic
Description
Artisan (by sq. ft.) Osaka Bars pays homage to the elegance and tradition of Japanese ceramics. Inspired by oriental landscapes and patterns, this collection fuses the serenity of nature with contemporary design. The soft colors and delicate textures capture the essence of zen gardens and cherry blossoms.
Each piece, created with meticulous attention to detail, reflects the simplicity and sophistication of traditional Japanese techniques. Available in five colors, Osaka Bars beautifies and brings tranquility to any space, inviting contemplation and appreciation of timeless beauty.
Colors
Thickness
8.5mm
Size (in.)
5″ x 10″(4.88″ x 9.80″)
Finish
Gloss
Shape
Rectangle
View the collection.
Usage
Testing
| Features | Specification |
|---|---|
| Dimensional Features | 124 mm +/- 0,75 mm x 249 mm +/- 0,1,20mm |
| Modulus of rupture and breaking strength | Thickness ≥ 7,5 mm mínimo 12 N/mm2 Thickness < 7,5 mm mínimo 15 N/mm2 |
| Chemical Resistance | GHA |
| Tone Variation | V3 |
| Crazing Resistance | Pass |
| Household products resistance | GA |
| Stain Resistance | 5 |
| Water Absorption | >10% |
Packing
| Specification | Value |
|---|---|
| Pieces Per Box | 14 |
| Lb/Box | 16,20 lb |
| Square Feet Per Box | 4,715 sq ft |
| Boxes/Pallet | 138 |
| Sq ft/Pallet | 650,614 sq ft |
ROUNDED CORNERS
WAREHOUSING
In order to guarantee the characteristics of the finish the product must be kept in its original packaging until the time of fixing. If the product is likely to be stored for a long period of time it should be suitably covered.
TILE FIXING
To ensure the products adhere correctly to the surface, it is essential to use specific adhesive and grouting material. This must also be suitable for the environment they will have to withstand. Fitting with traditional mortars does not ensure good adhesion.
Due to the nature of the material there may be dimensional variations between pieces. Therefore , all types of joints must be planned and carried out correctly: structural, perimeter, expansion and installation joints. Fitting tiles without joints is not advisable from any technical point of view as this may lead to various problems.
MAINTENANCE AND CLEANING
Once the materials have been fitted, it is advisable to remove any remaining adhesive and grouting material by using a commercial descaling product designed especially, diluted with water . The descaling product must not remain in contact with the surface to be cleaned for more than 5 minutes.
As a general guideline, powder detergents should not be used, not wire wool or abrasive materials. Generally a sponge will be sufficient with warm water and liquid neutral soap. Then rinse with plenty of clean water.
